Heating element for radiator 360 W Right
-
17.41€
Pay attention!
Buing from us, you get a device with a temperature controller, which, while ensuring high comfort, does not consume a single extra kilowatt of electricity!
Description
A heater for a heating radiator is a heating element that is installed in a radiator (aluminum or bimetallic) or even in an old cast-iron battery. Heating elements are controlled by a temperature regulator and have two terminals for connecting power and a terminal for connecting grounding. The design has a tube (pipe) for inserting a temperature measurement sensor. The heater installed in the radiator for heating has a right-hand thread with a diameter of 1 inch. The heating element is screwed on with a 32 mm wrench. Includes heat-resistant sealing gasket.
- Power: 390 W
- Heating area: up to 6-7 m2 (with ceiling heights up to 3 m)
- Thread Diameter: 1 ”(Right) 32mm Wrench
- The length of the heating element TENA inside the heating radiator: 220mm
- For the number of sections 80 mm wide: 3
- Tube material: stainless steel
- Supply voltage: 220 V
|
Power (220V) |
Heating element length (in radiator) | Number of sections (width 80 mm) | Heating area (height up to 3 m) |
| 360 Vt | 210 mm | 3 sections | 6-7 m2 |
| 480 Vt | 285 mm | 4 sections | 8-9 m2 |
| 600 Vt | 360 mm | 5 sections | 10-12 m2 |
| 720 Vt | 435 mm | 6 sections |
12-14 m2 |
| 840 Vt | 510 mm | 7 sections | 14-16 m2 |
| 960 Vt | 585 mm | 8 sections | 16-19 m2 |
| 1080 Vt | 660 mm | 9 sections | 18-21 m2 |
| 1200 Vt | 735 mm | 10 sections | 20-24 m2 |
| 1320 Vt | 810 mm | 11 sections | 22-26 m2 |
| 1500 Vt | 885 mm | 12 sections | 24-30 m2 |
