The ERAFLYME electric coil consists of a bent stainless steel tube and one or more aluminum radiator sections. Inside the structure there is a heating element and antifreeze coolant. Like all our products, for convenience and economic consumption, they are equipped with a digital thermostat of our production.
Thanks to good protection against overheating and a maximum temperature on the coil of no more than 60 ° C, an electric heated towel rail with a temperature controller does not dry the air, and is also fireproof and can be easily installed in a bathroom, garages, wooden houses, and children's rooms. The maximum temperature on the surface of an electric heated towel rail is 60 ° C, it can also be additionally regulated.
The electric coil can be used both for drying towels and for heating the room in which it is installed (bathroom, bathroom, etc.). At the same time, the size and power are chosen by the customer, depending on the volume of the room.
The surface temperature on the electric coil can be set in the range of 30 ... 72 ° C, regardless of the ambient temperature, or the air temperature in the bathroom can be set in the range of 5 ... 40 ° C, and the surface temperature of the heated towel rail will depend on the degree of hanging with towels and heat loss premises.
Functions of the coil with FLYME thermostat:
- control / setting of the air temperature in the room;
- control of the surface temperature of the electric coil;
- setting the limiting temperature of the coil surface;
- heating according to the schedule: the ability to set the hourly / daily / weekly cycle of work;
- the ability to lock buttons;
- minimization of energy losses;
- climate control function.
The coil can have 1, 2, or 3 sections. The power of these models is from 250 to 390 W, which is enough for full heating of a room up to 7 m². The heated towel rail is connected to the coil on the right side.