Heating element for radiator 1300 W Right
-
26.13€
Buing from us, you get a device with a temperature controller, which, while ensuring high comfort, does not consume a single extra kilowatt of electricity!
Description
A heater for a heating radiator is a heating element that is installed in a radiator (aluminum or bimetallic) or even in an old cast-iron battery. Heating elements are controlled by a temperature regulator and have two terminals for connecting power and a terminal for connecting grounding. The design has a tube (pipe) for inserting a temperature measurement sensor. The heater installed in the radiator for heating has a right-hand thread with a diameter of 1 inch. The heating element is screwed on with a 32 mm wrench. Includes heat-resistant sealing gasket.
- Power: 1300 W
- Heating area: up to 24 m2 (with ceiling heights up to 2,7 m)
- Thread Diameter: 1 ”(Right) 32mm Wrench
- The length of the heating element TENA inside the heating radiator: 220mm
- For the number of sections 80 mm wide: 10 - 12
- Tube material: stainless steel
- Supply voltage: 220 V
|
Power (220V) |
For heating element (in the radiator) |
Number of sections (width 80 mm) |
|
| 390 Vt | 220 mm | 3 – 4 sections |
до 7 m2 |
| 650 Vt | 380 mm | 5 – 7 sections |
до 12 m2 |
| 910 Vt | 540 mm | 7 – 9 sections |
до 16 m2 |
| 1300 Vt | 780 mm | 10 – 12 sections |
до 24 m2 |
