Buing from us, you get a device with a temperature controller, which, while ensuring high comfort, does not consume a single extra kilowatt of electricity!
Electric convector for manufacturing of materials and equipment with a "reasonable" thermo regulator. Thanks to this, the energy consumption in THREE DESIGN is lower than in conventional convectors of the same type! At viddminnostyh vidnyh convectors, do not dry a repeater. To ensure that the program of the thermo regulator controls the distribution of the heating element, do not give rise to temperatures higher than 95 ℃. You can also control and set the temperature between 5-35℃.
You can also control and set the temperature between 5-35℃ at maximum convector surface temperature;
It is possible to block the buttons on the thermo regulator panel (for children, etc.);
Robots on the shelf (hours/days/weeks); Does not exceed the maximum temperature of the convector surface;
The temple is passively baked;
The products are certified. (Certification is granted by the permit system for the acceptance of agreements for electric heating).
* not recommended for use in rooms with high humidity
|Day and week programming
|Adjusting the surface temperature of the heater
|Method of heating
|Frequency of current
|The presence of a thermostat
|Ingress Protection Rating (IP)